XingAI Home
← 全部示例決定

示例案例

Fix this week — tonight if the drip speeds up自己修的難度: 2 / 5

Water pooling under the kitchen sink

Kitchen · Plumbing

你描述的情況: A slow drip from the curved pipe under the sink; the cabinet floor is damp and a bucket fills about an inch overnight.

較可能是什麼

Most likely a worn P-trap slip-joint washer or a loose compression nut. This is the single most common under-sink leak — and one of the few plumbing jobs that is genuinely DIY-friendly: no soldering, no supply-line pressure once the valves are off.

決定

Do it yourself. Parts are under $20 and the job takes about half an hour.

預覽版。不會上傳照片,服務器也不做診斷。

自己做

$10–$25 in parts · 30–45 minutes

動手前 — 先做安全檢查

  • • Confirm the leak has not reached any outlet, cord, or appliance under the sink. If water is touching anything electrical, do not reach in — stop and call a pro.
  • • Check that both shut-off valves turn by hand. A valve that is stuck, crumbling, or already leaking is on the pressurized supply side — stop here; replacing it is a plumber job.
  • • If the leak is getting worse quickly, or the cabinet floor feels soft, swollen, or rotten, skip the DIY steps and call a plumber.
  1. 1Turn both shut-off valves under the sink clockwise until they stop. Run the faucet to confirm the water is off.
  2. 2Put a bucket under the P-trap (the U-shaped pipe) and loosen the two big plastic nuts by hand — expect a cup or two of water.
  3. 3Slide the trap off. Check the thin beveled washers on each joint; a cracked or flattened washer is almost always the culprit.
  4. 4Take the old washer to the hardware store and match it exactly (1-1/2 in is standard for kitchen sinks). Replace both washers while you're in there.
  5. 5Reassemble hand-tight, then a quarter-turn more with pliers — no more. Overtightening cracks the nuts.
  6. 6Turn the water back on, run the faucet for two minutes, and feel every joint with a dry paper towel. Any dampness means reseat that joint.

工具和零件

  • • Bucket
  • • Slip-joint pliers
  • • Replacement P-trap washer kit (1-1/2 in)
  • • Paper towels
  • • Flashlight

安全線

  • • Shut the water off first — always. If a shut-off valve itself leaks or won't turn, stop: that valve is on the pressurized supply side and is a plumber job.
  • • No chemicals needed. Skip drain cleaner for a leak — it isn't a clog problem.

出現這些情況就停,改叫師傅… Call a plumber instead if: the leak is at the shut-off valve or the wall stub-out, you see mold or cabinet rot spreading, or the drain line itself is cracked. Austin plumbers typically charge $150–$300 for a trap replacement visit (sample range).

價格區間是本預覽用的奧斯汀示例數據(示例數字,截至 2026 年 10 月)。

僅供參考。拿不準時,找持證師傅是一個成立的決定。